Joystick Mounting Kits
Joystick
"Blind
Hole" Mounting kits
No more
coach-bolt heads
spoiling your panel!
These kits contain inserts which are designed for use in 5/8 or 3/4
inch wood. A hole is drilled in the panel but not all the way
through, and then the inserts are wound in using a hex key.
Available in 2 sizes, 6mm suitable for Mag-Stik and 5mm suitable for
all other joysticks.
You will need a 1/4 in hex key (6mm) for the large size inserts or a
3/16 in key (5mm) for the small size.
Screw Size:
5mm for all except Mag-Stik